Featured Study Guides

CBSE Class 10 Science Competency-Based Questions 2027

CBSE Class 10 Science competency-based questions and answers for 202

Preparing for the CBSE Class 10 Science Board Examination 2027? Simply memorising definitions and reading textbook chapters may not be enough. You also need to understand scientific concepts, apply them to everyday situations, interpret information and solve unfamiliar problems.

This is where competency-based questions become important. These questions test whether you can use what you have learned instead of simply reproducing textbook sentences.

For example, instead of asking only for the definition of electric power, a question may describe two household appliances and ask you to calculate which one consumes more electrical energy.

In this comprehensive guide, you will find original CBSE Class 10 Science competency-based practice questions for 2027, including MCQs, assertion-reason questions, application-based problems, case studies and detailed answers from Biology, Chemistry and Physics.

Use these questions for practice alongside your NCERT textbook, classroom teaching and official CBSE sample paper.

Table of Contents

  1. What Are Competency-Based Questions?
  2. CBSE Class 10 Science Question Paper Design 2026–27
  3. How to Prepare for Competency-Based Questions
  4. Biology Practice Questions with Answers
  5. Chemistry Practice Questions with Answers
  6. Physics Practice Questions with Answers
  7. Case-Based Questions with Solutions
  8. Assertion and Reason Questions
  9. How to Write Better Answers
  10. Common Mistakes to Avoid
  11. 7-Day Practice Plan
  12. Frequently Asked Questions

1. What Are Competency-Based Questions in CBSE Class 10 Science?

Competency-based questions assess how well students understand and apply their knowledge in different situations.

These questions may include:

  • Real-life situations and scientific applications.
  • Experimental observations and conclusions.
  • Graphs, diagrams, tables and data interpretation.
  • Case-based and passage-based questions.
  • Assertion and reason questions.
  • Problems requiring logical thinking and calculations.

Example: Traditional Question vs Competency-Based Question

Traditional question Competency-based question
Define electric resistance. A student connects two resistors in a circuit and observes a change in current. Use the given voltage and current to calculate resistance.
What is photosynthesis? A plant is kept in darkness for two days and then exposed to sunlight. Explain how this affects the starch test in its leaves.
What is a neutralisation reaction? A farmer finds that the soil in a field is too acidic. Suggest a suitable substance to improve the soil and explain why.

The difference is that competency-based questions require you to use scientific knowledge to explain, interpret or solve a situation.

2. CBSE Class 10 Science Question Paper Design 2026–27

Students preparing for the 2027 examination should understand the official question-paper design for the 2026–27 academic session.

According to the Science curriculum, the theory paper is designed around three competency categories.

Competency Weightage Marks out of 80
Knowledge and understanding 50% 40
Application of knowledge and concepts 30% 24
Formulate, analyse, evaluate and create 20% 16
Total 100% 80

The question types may include:

  • Very short answer and objective questions.
  • Multiple-choice questions.
  • Assertion and reason questions.
  • Short-answer questions.
  • Long-answer questions.
  • Source-based, passage-based and case-based questions.
  • Integrated assessment questions.

The curriculum also indicates approximately 33% internal choice in the question paper.

Important official resources

Before preparing, download the latest official documents:

Note: Follow the prescribed syllabus for your examination session. Do not assume that every topic printed in an older textbook will necessarily be assessed in the year-end examination. Some topics may be designated for formative assessment only.

3. How to Prepare for Competency-Based Questions

Before attempting the practice questions, develop these five habits.

1. Understand the Concept First

Read the NCERT explanation carefully. Understand why a scientific process happens instead of memorising only its definition.

2. Connect Science with Daily Life

Think about the science behind household electricity, food digestion, plant growth, corrosion and environmental pollution.

3. Practise Application-Based Problems

After completing a topic, solve questions that require you to use the concept in a new situation.

4. Interpret Diagrams and Experimental Results

Practise identifying parts, understanding observations and drawing conclusions from experiments.

5. Check Your Answers

Compare your answers with the textbook and marking scheme. Identify missing scientific terms, incorrect reasoning and calculation mistakes.

For a broader preparation strategy, read our guide: CBSE Class 10 Science Preparation: NCERT-Based Study Guide.

4. Biology Competency-Based Questions with Answers

Biology questions often test understanding of life processes, diagrams, biological functions and real-life applications.

Question 1: Nutrition in Plants (1 Mark)

A student places a potted plant in darkness for 48 hours. After this, one leaf is partially covered with black paper and the plant is kept in sunlight. The leaf is later tested for starch using iodine solution.

Which part of the leaf is expected to turn blue-black?

A. Only the covered part

B. Only the uncovered part

C. Both covered and uncovered parts equally

D. Neither part

Correct answer: B. Only the uncovered part.

Explanation: The uncovered part receives sunlight and can carry out photosynthesis. The covered part does not receive sufficient light. Starch is formed in the photosynthesising region and gives a blue-black colour with iodine.

Question 2: Human Digestion (2 Marks)

A person has difficulty digesting fats because the normal flow of bile into the small intestine is reduced.

Answer the following:

(a) What is the role of bile in fat digestion?

(b) Why is bile important even though it does not contain digestive enzymes?

Answer:

(a) Bile helps emulsify large fat globules into smaller droplets, increasing the surface area for enzyme action.

(b) It also helps create an alkaline medium in the small intestine, which supports the action of digestive enzymes.

Question 3: Respiration (2 Marks)

During vigorous exercise, a student experiences muscle cramps after running for a long distance.

(a) Which type of respiration may occur in muscle cells when oxygen becomes insufficient?

(b) Name the substance associated with the cramps.

Answer:

(a) Anaerobic respiration.

(b) Lactic acid is produced during anaerobic respiration in muscle cells.

Question 4: Control and Coordination (2 Marks)

A person accidentally touches a hot object and immediately withdraws the hand before consciously thinking about the pain.

(a) Name this response.

(b) Which part of the central nervous system mainly coordinates this immediate response?

Answer:

(a) Reflex action.

(b) The spinal cord mainly coordinates the reflex response.

Question 5: Reproduction in Plants (3 Marks)

A gardener wants to grow several new rose plants that have the same desirable characteristics as the parent plant.

(a) Which method of reproduction can be used?

(b) Is this sexual or asexual reproduction?

(c) Mention one advantage of this method.

Answer:

(a) Vegetative propagation, such as stem cutting.

(b) Asexual reproduction.

(c) It allows rapid production of plants with characteristics similar to the parent plant.

Question 6: Our Environment (2 Marks)

A food chain consists of grass, grasshopper, frog and snake. If the number of frogs decreases significantly, what may happen to the grasshopper population and the snake population?

Answer:

The grasshopper population may increase because fewer frogs are feeding on them. The snake population may decrease because less food is available to them.

This shows how changes in one population can affect other organisms in a food chain.

5. Chemistry Competency-Based Questions with Answers

Chemistry questions often involve chemical equations, experimental observations, properties of substances and everyday applications.

Question 7: Chemical Reactions (1 Mark)

An iron nail is placed in blue copper sulphate solution. After some time, a reddish-brown coating appears on the nail and the blue colour of the solution changes.

Which conclusion is correct?

A. Iron is less reactive than copper.

B. Copper displaces iron from the solution.

C. Iron displaces copper from copper sulphate solution.

D. No chemical reaction occurs.

Correct answer: C. Iron displaces copper from copper sulphate solution.

Explanation: Iron is more reactive than copper and displaces copper from copper sulphate.

Fe + CuSO4 → FeSO4 + Cu

Question 8: Acids, Bases and Salts (2 Marks)

A student tests three solutions using universal indicator. The approximate pH values are:

SolutionpH
P3
Q7
R10

(a) Which solution is acidic?

(b) Which solution is alkaline?

Answer:

(a) Solution P is acidic because its pH is below 7.

(b) Solution R is alkaline because its pH is above 7.

Question 9: Acids in Everyday Life (2 Marks)

A farmer finds that the soil in a field is too acidic. Crop growth is affected.

(a) Suggest a suitable substance that may be added to reduce soil acidity.

(b) Explain its purpose.

Answer:

(a) Quicklime (calcium oxide) or slaked lime (calcium hydroxide).

(b) These basic substances help neutralise excess acidity in the soil.

Question 10: Metals and Non-Metals (2 Marks)

A student places zinc, iron and copper pieces separately in dilute hydrochloric acid.

(a) Which metal is expected to react most vigorously among these three?

(b) Which metal will not normally liberate hydrogen from dilute hydrochloric acid?

Answer:

(a) Zinc.

(b) Copper.

Explanation: Zinc and iron are above hydrogen in the reactivity series, whereas copper is below hydrogen.

Question 11: Carbon and Its Compounds (2 Marks)

A student compares ethanol and ethanoic acid using blue litmus paper.

(a) Which substance turns blue litmus red?

(b) What does this observation indicate?

Answer:

(a) Ethanoic acid.

(b) It indicates acidic behaviour. Ethanol does not normally turn blue litmus red.

Question 12: Chemical Reactions in Daily Life (3 Marks)

A student observes that an iron gate kept in an open environment develops a reddish-brown layer over time.

(a) Name this process.

(b) Mention two conditions that promote it.

(c) Suggest one method to prevent it.

Answer:

(a) Rusting or corrosion of iron.

(b) Presence of oxygen and moisture.

(c) Painting, oiling, greasing or galvanisation can help prevent rusting.

To revise the reactions and concepts more thoroughly, read: How to Remember Chemical Reactions for CBSE Class 10.

6. Physics Competency-Based Questions with Answers

Physics questions test numerical ability, interpretation of diagrams, scientific laws and practical applications.

Question 13: Electricity – Ohm's Law (2 Marks)

A resistor is connected to a 12 V battery. A current of 2 A flows through it.

(a) Calculate the resistance.

(b) What will be the current if the voltage is increased to 18 V, assuming the resistance remains constant?

Solution:

Given:

V = 12 V

I = 2 A

Using Ohm's law:

R = V/I

R = 12/2 = 6 Ω

For the second condition:

I = V/R

I = 18/6 = 3 A

Answers: (a) 6 Ω. (b) 3 A.

Question 14: Electric Power (2 Marks)

An electric appliance operates at 220 V and draws a current of 2 A.

Calculate its power.

Solution:

Given:

V = 220 V

I = 2 A

Power = Voltage × Current

P = VI

P = 220 × 2

P = 440 W

Question 15: Series and Parallel Circuits (2 Marks)

Two resistors of 4 Ω and 6 Ω are connected in series.

(a) Calculate their equivalent resistance.

(b) What would their equivalent resistance be if they were connected in parallel?

Solution:

(a) Series combination:

R = R1 + R2

R = 4 + 6 = 10 Ω

(b) Parallel combination:

1/R = 1/R1 + 1/R2

1/R = 1/4 + 1/6

1/R = 5/12

R = 12/5 = 2.4 Ω

Question 16: Light – Refraction (2 Marks)

A ray of light travels from air into glass. It bends towards the normal.

(a) Why does the ray bend towards the normal?

(b) What happens to its speed when it enters glass from air?

Answer:

(a) Light travels more slowly in glass than in air, causing it to refract towards the normal when it enters glass obliquely.

(b) Its speed decreases.

Question 17: Spherical Mirrors (2 Marks)

A dentist uses a curved mirror to obtain an enlarged image of a patient's tooth.

(a) Which type of mirror is suitable?

(b) Where should the tooth be placed relative to the mirror?

Answer:

(a) A concave mirror.

(b) Between the pole and the principal focus, so that an enlarged, erect and virtual image is formed.

Question 18: Magnetic Effects of Electric Current (2 Marks)

A straight wire carrying electric current is placed near a magnetic compass. The compass needle gets deflected.

(a) What does this observation demonstrate?

(b) What happens to the direction of the magnetic field if the direction of current is reversed?

Answer:

(a) An electric current produces a magnetic field around a conductor.

(b) The direction of the magnetic field reverses.

7. Case-Based Competency Questions with Solutions

Case-based questions provide a short passage, experimental situation or real-life example followed by several related questions. Read the information carefully before answering.

Case Study 1: Photosynthesis and Plant Growth (4 Marks)

A student conducts an experiment using two similar potted plants. Both plants are watered regularly. Plant A is kept in sunlight, whereas Plant B is kept in a dark room for a prolonged period. After suitable preparation, leaves from both plants are tested for starch using iodine solution.

Answer the following:

(a) Which plant is expected to show more starch in its leaves? (1)

(b) Which essential factor is missing for photosynthesis in Plant B? (1)

(c) Why is starch used as evidence of photosynthesis? (2)

Answers:

(a) Plant A.

(b) Sunlight.

(c) During photosynthesis, plants produce carbohydrates. Some of the produced food is stored as starch. Iodine turns blue-black in the presence of starch, providing evidence of its presence.

Case Study 2: Household Acids and Bases (4 Marks)

A student tests three household substances using pH paper. Lemon juice has a pH of approximately 2, pure water has a pH of 7 and a soap solution has a pH of approximately 10.

Answer the following:

(a) Which substance is most acidic? (1)

(b) Which substance is neutral? (1)

(c) Why should a student avoid touching strong acidic or alkaline solutions directly? (2)

Answers:

(a) Lemon juice.

(b) Pure water.

(c) Strong acids and bases may cause chemical burns and damage skin or eyes. Appropriate laboratory safety precautions must be followed.

Case Study 3: Electrical Energy Consumption (4 Marks)

A family uses two electrical appliances:

AppliancePowerDaily use
Appliance A1000 W2 hours
Appliance B500 W4 hours

Answer the following:

(a) Convert the power of Appliance A into kilowatts. (1)

(b) Calculate the electrical energy consumed by Appliance A in one day. (1)

(c) Compare the daily electrical energy consumption of both appliances. (2)

Answers:

(a) 1000 W = 1 kW.

(b) Energy = Power × Time

= 1 kW × 2 h = 2 kWh.

(c) Appliance B = 0.5 kW × 4 h = 2 kWh.

Both appliances consume the same electrical energy per day, which is 2 kWh.

8. Assertion and Reason Questions

Choose the correct option for each question:

A. Both Assertion and Reason are true, and Reason correctly explains Assertion.

B. Both Assertion and Reason are true, but Reason does not correctly explain Assertion.

C. Assertion is true, but Reason is false.

D. Assertion is false, but Reason is true.

Question 19 (1 Mark)

Assertion: The small intestine has numerous finger-like projections called villi.

Reason: Villi increase the surface area available for absorption of digested food.

Correct answer: A.

Explanation: Villi increase the surface area of the small intestine and help absorb nutrients efficiently.

Question 20 (1 Mark)

Assertion: A concave mirror can form a virtual and enlarged image.

Reason: When an object is placed between the pole and focus of a concave mirror, the image formed is virtual, erect and enlarged.

Correct answer: A.

Explanation: The stated object position produces an enlarged virtual image behind the mirror.

Question 21 (1 Mark)

Assertion: Copper does not normally displace hydrogen from dilute hydrochloric acid.

Reason: Copper is below hydrogen in the reactivity series.

Correct answer: A.

Explanation: Metals below hydrogen in the reactivity series cannot normally displace hydrogen from dilute non-oxidising acids.

Question 22 (1 Mark)

Assertion: The equivalent resistance of two resistors connected in parallel is less than the resistance of either individual resistor.

Reason: The reciprocal of equivalent resistance equals the sum of the reciprocals of individual resistances.

Correct answer: A.

Explanation: For positive resistances, adding their reciprocals results in an equivalent resistance smaller than either resistor.

9. Additional Short Practice Questions

Try these questions independently before checking your textbook.

  1. Why is the cell membrane described as selectively permeable?
  2. What is the function of stomata in leaves?
  3. Why are ionic compounds generally hard solids?
  4. Why is galvanisation used to protect iron objects?
  5. What is the difference between aerobic and anaerobic respiration?
  6. Why are domestic electrical appliances connected in parallel?
  7. What is the function of the iris in the human eye?
  8. Why should biodegradable and non-biodegradable wastes be managed differently?

Self-check answers:

  1. It allows certain substances to pass through while restricting others.
  2. Stomata allow gaseous exchange and help regulate water loss through transpiration.
  3. Strong electrostatic forces hold oppositely charged ions together.
  4. Zinc coating protects iron from contact with air and moisture.
  5. Aerobic respiration uses oxygen; anaerobic respiration occurs without oxygen.
  6. Parallel connections allow appliances to operate independently at their rated voltage.
  7. The iris controls the size of the pupil and regulates the amount of light entering the eye.
  8. Biodegradable waste can be decomposed by microorganisms, whereas non-biodegradable waste persists longer and needs suitable disposal or recycling.

10. How to Write Better Answers in Competency-Based Questions

Even when you understand a concept, poor answer presentation can make your response unclear. Follow these simple techniques.

1. Identify What the Question Is Asking

Look for words such as calculate, explain, compare, justify, identify and analyse. These words indicate the type of answer required.

2. Use Scientific Keywords

Include relevant scientific terms instead of writing vague explanations.

3. Show Calculation Steps

For numerical questions, write the given values, formula, substitution, calculation and final answer with the correct unit.

4. Explain the Reason

Do not write only the final conclusion when the question asks why or how. Support your answer with scientific reasoning.

5. Draw Labelled Diagrams When Needed

Use a neat diagram where it helps explain a biological structure, optical arrangement or electrical circuit.

6. Follow the Marks

For a two-mark question, give two relevant points or a sufficiently complete explanation. Avoid writing unnecessary paragraphs.

11. Common Mistakes Students Should Avoid

  • Memorising answers without understanding the concept.
  • Ignoring units in Physics calculations.
  • Writing unbalanced chemical equations.
  • Confusing observation with conclusion in experiments.
  • Ignoring important information in case-study passages.
  • Choosing an assertion-reason option without checking both statements.
  • Practising only direct textbook questions.
  • Not checking answers against the NCERT textbook and marking scheme.

12. Seven-Day Practice Plan for CBSE Class 10 Science

Use this simple seven-day plan to practise competency-based questions. Adjust it according to your school timetable and the chapters prescribed for your examination.

DayPractice focusTask
Day 1BiologyPractise Life Processes and Control and Coordination questions.
Day 2ChemistryPractise chemical reactions, equations and observations.
Day 3PhysicsSolve Electricity and Light application questions.
Day 4Case studiesAttempt passage-based questions from all three sections.
Day 5Assertion and reasonPractise statements and identify their logical relationship.
Day 6Mixed practiceAttempt a mixed set of MCQs and short-answer questions.
Day 7Self-assessmentTake a timed test and analyse your mistakes.

13. How to Use the Official Sample Paper Effectively

After practising the questions in this guide, download the official CBSE Science sample paper and marking scheme.

Follow this process:

  1. Attempt the sample paper under timed conditions.
  2. Do not check the answers while attempting it.
  3. Compare your answers with the official marking scheme.
  4. Identify concepts that need further revision.
  5. Practise similar questions from those topics.
  6. Repeat the process with another practice set when available.

Remember that sample papers show the expected question-paper design. They do not guarantee the exact questions that will appear in the board examination.

14. Frequently Asked Questions (FAQs)

1. What are competency-based questions in CBSE Class 10 Science?

They are questions that assess a student's ability to understand, apply, analyse and use scientific concepts in practical or unfamiliar situations.

2. Are competency-based questions important for CBSE Class 10 Science 2027?

Yes. The 2026–27 Science question-paper design includes knowledge and understanding, application, and higher-order analytical competencies. Students should practise all three categories.

3. What types of competency-based questions can appear?

They may include MCQs, assertion-reason questions, numerical problems, experimental questions, case-based questions, passage-based questions and integrated assessment questions.

4. How can I prepare for case-based questions?

Read the passage carefully, identify the relevant scientific concept, note the given information and answer each sub-question independently.

5. Are NCERT textbooks sufficient for preparation?

NCERT should be your main learning resource. Strengthen your preparation with NCERT exercises, practical work, official sample papers, marking schemes and additional application-based practice.

6. How should I prepare for assertion and reason questions?

Check whether the assertion is true, then independently evaluate the reason. Finally, determine whether the reason correctly explains the assertion.

7. How much time should I spend practising these questions?

Set aside a regular practice period according to your schedule. Even 20–30 minutes of focused question practice can help you identify weaknesses and improve problem-solving skills.

8. Are these questions actual CBSE board examination questions?

No. The questions in this guide are original practice questions prepared for learning and revision. They are not official CBSE questions or predictions.

15. Final Words: Prepare with Understanding, Not Just Memorisation

CBSE Class 10 Science preparation should go beyond reading chapters and memorising definitions. You should be able to explain scientific processes, interpret observations, solve numerical problems and apply concepts to everyday situations.

Start with the NCERT textbook, practise the questions in this guide, review your mistakes and attempt official sample papers under timed conditions.

Most importantly, do not wait until the final weeks before the examination to practise application-based questions. Make them a regular part of your preparation.

Study smart, practise consistently and build confidence for your CBSE Class 10 Science Board Examination 2027.


Explore More CBSE Class 10 Study Guides

About the Author

Sadashiba Sahu is a teacher and education blogger and the founder of Choice Better. Through practical study strategies, subject guides and examination resources, he aims to help students understand concepts, prepare effectively and learn smarter.

Disclaimer: This is an independently prepared educational practice guide. It is not affiliated with or endorsed by CBSE. Refer to the official CBSE curriculum, sample papers and school instructions for the latest examination requirements.

Class 10 Electricity Numericals with Solutions – CBSE 2027

Class 10 Electricity numericals with step-by-step solutions

Electricity is one of the most important chapters in CBSE Class 10 Science. Many students understand the theory but find it difficult to solve numerical problems involving electric current, potential difference, resistance, electric power and electrical energy.

The good news is that most Class 10 Electricity numericals can be solved easily if you understand the formulas, identify the given values and follow a systematic approach.

In this guide, you will learn how to solve Class 10 Electricity numericals step by step, with clear explanations, solved examples, important formulas and practice questions.

Whether you are preparing for your school examination, pre-board examination or CBSE Board Exam 2027, this article will help you improve your numerical-solving skills.

Table of Contents

1. Important Concepts of Electricity

Before solving numerical problems, students should understand the following basic concepts.

Electric Current

Electric current is the rate of flow of electric charge through a conductor.

I = Q / t

Where:

  • I = Electric current
  • Q = Electric charge
  • t = Time

SI unit of electric current is ampere (A). One ampere means one coulomb of charge flows through a conductor in one second.

Potential Difference

Potential difference between two points is the work done per unit charge to move a charge from one point to another.

V = W / Q

Where V is potential difference, W is work done and Q is electric charge. Its SI unit is volt (V).

Resistance

Resistance is the property of a conductor that opposes the flow of electric current.

R = V / I

Its SI unit is ohm (Ω).

Ohm's Law

According to Ohm's law, the current flowing through a conductor is directly proportional to the potential difference across its ends, provided its temperature and other physical conditions remain constant.

V = IR

This is one of the most important formulas for solving Class 10 Electricity numericals.

2. Important Electricity Formulas for Class 10

Students should memorise the following formulas before attempting numerical problems.

Physical QuantityFormulaSI Unit
Electric currentI = Q/tAmpere
Electric chargeQ = ItCoulomb
Potential differenceV = W/QVolt
Ohm's lawV = IRVolt
ResistanceR = V/IOhm
Resistance of conductorR = ρl/AOhm
Series resistanceRs = R1 + R2 + R3Ohm
Parallel resistance1/Rp = 1/R1 + 1/R2 + 1/R3Ohm
Electric powerP = VIWatt
PowerP = I²RWatt
PowerP = V²/RWatt
Electrical energyE = PtJoule
Heating effectH = I²RtJoule

Important Unit Conversions

  • 1 kW = 1000 W
  • 1 hour = 3600 seconds
  • 1 kWh = 3.6 × 10⁶ J
  • 1 mA = 0.001 A
  • 1 kΩ = 1000 Ω
Exam Tip: Convert all values into appropriate SI units before substituting them into formulas.

3. How to Solve Class 10 Electricity Numericals

Follow this five-step method to solve numerical problems correctly.

  1. Read the question carefully: Identify what the question is asking.
  2. Write the given values: Note down all the numerical values with units.
  3. Identify the formula: Select the correct formula.
  4. Substitute the values: Put the given values into the formula.
  5. Write the final answer: Include the correct SI unit.
Example:

Potential difference = 12 V

Resistance = 4 Ω

Required current:

I = V/R

I = 12/4

I = 3 A

4. Numericals Based on Electric Current

Example 1: Calculate Electric Current

Question: A charge of 600 C flows through a conductor in 5 minutes. Calculate the electric current.

Given:

Q = 600 C

t = 5 minutes = 300 seconds

Formula:

I = Q/t

Substitution:

I = 600/300

I = 2 A

Answer: The electric current is 2 A.

Example 2: Calculate Electric Charge

Question: A current of 2.5 A flows through a wire for 4 minutes. Calculate the total charge flowing through the wire.

Given:

I = 2.5 A

t = 4 × 60 = 240 seconds

Formula:

Q = It

Q = 2.5 × 240

Q = 600 C

Answer: The total electric charge is 600 coulombs.

5. Numericals Based on Ohm's Law

Example 3: Calculate Current Using Ohm's Law

Question: A potential difference of 12 V is applied across a resistor of 6 Ω. Find the current flowing through it.

Given:

V = 12 V, R = 6 Ω

Formula:

I = V/R

I = 12/6

I = 2 A

Answer: The current is 2 A.

Example 4: Calculate Resistance

Question: A potential difference of 24 V produces a current of 3 A through a conductor. Calculate its resistance.

Given:

V = 24 V, I = 3 A

Formula:

R = V/I

R = 24/3

R = 8 Ω

Answer: The resistance is 8 Ω.

Example 5: Calculate Potential Difference

Question: A current of 0.5 A flows through a resistor of 20 Ω. Find the potential difference.

Given:

I = 0.5 A, R = 20 Ω

Formula:

V = IR

V = 0.5 × 20

V = 10 V

Answer: The potential difference is 10 V.

6. Numericals Based on Resistance and Resistivity

Resistance depends on the length, area of cross-section, material and temperature of a conductor.

R = ρl/A

Where R is resistance, ρ is resistivity, l is length and A is area of cross-section.

Example 6: Calculate Resistance Using Resistivity

Question: A wire has a length of 2 m and a cross-sectional area of 1 × 10⁻⁶ m². If its resistivity is 1.7 × 10⁻⁸ Ωm, calculate its resistance.

Given:

l = 2 m

A = 1 × 10⁻⁶ m²

ρ = 1.7 × 10⁻⁸ Ωm

Formula:

R = ρl/A

R = (1.7 × 10⁻⁸ × 2)/(1 × 10⁻⁶)

R = 0.034 Ω

Answer: The resistance is 0.034 Ω.

Example 7: Effect of Changing the Length of a Wire

Question: The resistance of a wire is 5 Ω. What will be its resistance if its length is doubled without changing its area of cross-section or material?

We know that resistance is directly proportional to length.

R ∝ l

New resistance = 2 × 5

New resistance = 10 Ω

Answer: The new resistance is 10 Ω.

7. Numericals Based on Series Combination of Resistors

When resistors are connected one after another in a single path, they are said to be connected in series.

Rs = R1 + R2 + R3
  • Current remains the same through all resistors.
  • Potential difference is divided among the resistors.
  • Equivalent resistance is greater than the individual resistances.

Example 8: Calculate Equivalent Resistance in Series

Question: Three resistors of 2 Ω, 3 Ω and 5 Ω are connected in series. Calculate their equivalent resistance.

Given:

R1 = 2 Ω, R2 = 3 Ω, R3 = 5 Ω

Formula:

Rs = R1 + R2 + R3

Rs = 2 + 3 + 5

Rs = 10 Ω

Answer: The equivalent resistance is 10 Ω.

Example 9: Calculate Current in a Series Circuit

Question: Two resistors of 4 Ω and 6 Ω are connected in series with a 20 V battery. Calculate the current.

Step 1: Calculate equivalent resistance.

Rs = 4 + 6 = 10 Ω

Step 2: Apply Ohm's law.

I = V/R

I = 20/10

I = 2 A

Answer: The current is 2 A.

8. Numericals Based on Parallel Combination of Resistors

When two or more resistors are connected between the same two points, they are said to be connected in parallel.

1/Rp = 1/R1 + 1/R2 + 1/R3

For two resistors:

Rp = (R1 × R2)/(R1 + R2)
  • Potential difference is the same across each resistor.
  • Current is divided among the branches.
  • Equivalent resistance is less than the smallest individual resistance.

Example 10: Calculate Equivalent Resistance in Parallel

Question: Two resistors of 6 Ω and 3 Ω are connected in parallel. Calculate their equivalent resistance.

Given:

R1 = 6 Ω, R2 = 3 Ω

Formula:

Rp = (R1 × R2)/(R1 + R2)

Rp = (6 × 3)/(6 + 3)

Rp = 18/9

Rp = 2 Ω

Answer: The equivalent resistance is 2 Ω.

Example 11: Calculate Current in a Parallel Circuit

Question: Two resistors of 4 Ω and 12 Ω are connected in parallel across a 12 V battery. Calculate the total current supplied by the battery.

Step 1: Calculate equivalent resistance.

Rp = (4 × 12)/(4 + 12)

Rp = 48/16 = 3 Ω

Step 2: Calculate total current.

I = V/Rp

I = 12/3

I = 4 A

Answer: The total current is 4 A.

9. Numericals Based on Electric Power

Electric power is the rate at which electrical energy is consumed or converted into another form of energy.

P = VI
P = I²R
P = V²/R

The SI unit of power is watt (W).

Example 12: Calculate Electric Power

Question: An electric appliance operates at 220 V and draws a current of 2 A. Calculate its power.

Given:

V = 220 V, I = 2 A

Formula:

P = VI

P = 220 × 2

P = 440 W

Answer: The power is 440 W.

Example 13: Calculate Resistance from Power and Voltage

Question: An electric bulb is rated 100 W, 200 V. Calculate its resistance.

Given:

P = 100 W, V = 200 V

Formula:

R = V²/P

R = (200 × 200)/100

R = 40000/100

R = 400 Ω

Answer: The resistance is 400 Ω.

10. Numericals Based on Electrical Energy and Heating Effect

When electric current passes through a resistor, electrical energy is converted into heat.

Joule's Law of Heating

H = I²Rt

Electrical energy is calculated using:

E = Pt

The commercial unit of electrical energy is kilowatt-hour (kWh).

Example 14: Calculate Electrical Energy Consumed

Question: An electric heater of 1000 W is used for 2 hours. Calculate the electrical energy consumed in kWh.

Given:

Power = 1000 W = 1 kW

Time = 2 hours

Formula:

E = P × t

E = 1 × 2

E = 2 kWh

Answer: The electrical energy consumed is 2 kWh or 2 units.

Example 15: Calculate Heat Produced

Question: A current of 2 A flows through a resistance of 5 Ω for 10 seconds. Calculate the heat produced.

Given:

I = 2 A, R = 5 Ω, t = 10 seconds

Formula:

H = I²Rt

H = 2² × 5 × 10

H = 4 × 5 × 10

H = 200 J

Answer: The heat produced is 200 joules.

Example 16: Calculate the Cost of Electricity

Question: A 2 kW electric heater is used for 3 hours daily for 10 days. If the cost of electricity is ₹6 per unit, calculate the total electricity bill.

Given:

Power = 2 kW

Daily usage = 3 hours

Number of days = 10

Cost per unit = ₹6

Step 1: Calculate energy consumed.

Energy = 2 × 3 × 10 = 60 kWh

Step 2: Calculate cost.

Cost = 60 × 6

Total cost = ₹360

Answer: The total electricity cost is ₹360.
Note: This is a simplified calculation using the given per-unit rate. Actual electricity bills may include fixed charges, taxes and other adjustments.

11. Mixed Competency-Based Electricity Questions

Competency-based questions test whether students can apply scientific concepts to practical situations.

Question 1: Electric Heater

An electric heater is connected to a 220 V supply and draws a current of 5 A. Find (a) resistance and (b) power.

(a) Resistance:

R = V/I = 220/5

R = 44 Ω

(b) Power:

P = VI = 220 × 5

P = 1100 W

Question 2: Two Bulbs

Two bulbs rated 60 W and 100 W are connected to the same voltage supply. Which bulb has greater resistance?

We know that R = V²/P.

For the same voltage, resistance is inversely proportional to power.

The 60 W bulb has greater resistance.

Question 3: Household Electrical Consumption

A family uses a 100 W television for 5 hours daily. Calculate the energy consumed in 30 days.

Power = 100 W = 0.1 kW

Time = 5 × 30 = 150 hours

Energy = P × t

Energy = 0.1 × 150

Energy = 15 kWh

Answer: The television consumes 15 units of electrical energy.

12. Common Mistakes Students Should Avoid

Even students who understand the formulas sometimes lose marks due to simple calculation and presentation mistakes.

  1. Forgetting unit conversion: Convert minutes into seconds when using SI units.
  2. Using the wrong formula: Identify the required physical quantity before selecting a formula.
  3. Confusing series and parallel: In series, resistances are added directly. In parallel, reciprocals are added.
  4. Ignoring square terms: Remember that P = I²R contains the square of current.
  5. Writing incomplete answers: Always mention the correct SI unit.
  6. Making calculation errors: Check multiplication, division and decimal placement.
  7. Confusing kW and kWh: kW measures power, whereas kWh measures electrical energy.

13. Practice Questions for CBSE Class 10 Students

Try solving these questions independently before checking the answers.

Section A: Basic Numericals

  1. A charge of 120 C flows through a conductor in 2 minutes. Calculate the current.
  2. A resistor of 10 Ω is connected to a 20 V battery. Find the current.
  3. Calculate the potential difference across a resistor of 15 Ω carrying a current of 2 A.

Section B: Resistance Combination

  1. Three resistors of 2 Ω, 4 Ω and 6 Ω are connected in series. Find the equivalent resistance.
  2. Two resistors of 8 Ω and 8 Ω are connected in parallel. Calculate their equivalent resistance.
  3. Two resistors of 5 Ω and 10 Ω are connected in parallel. Find the equivalent resistance.

Section C: Power and Energy

  1. An electric appliance operates at 220 V and draws 1 A current. Calculate its power.
  2. A 500 W electric appliance is used for 4 hours. Calculate the energy consumed in kWh.
  3. Calculate the resistance of a 100 W bulb operating at 200 V.
  4. A current of 3 A flows through a resistance of 4 Ω for 5 seconds. Calculate the heat produced.

Answer Key

QuestionCorrect Answer
Q11 A
Q22 A
Q330 V
Q412 Ω
Q54 Ω
Q63.33 Ω (approximately)
Q7220 W
Q82 kWh
Q9400 Ω
Q10180 J
Study Challenge: Try solving all ten questions without looking at the answer key. Then check your calculations and identify the formulas that need more practice.

14. How to Prepare Electricity Numericals for CBSE Board Exam 2027

You do not need to solve hundreds of questions every day to become good at Electricity numericals. A systematic practice routine is more effective.

DayWhat to Practise
Day 1Electric current, charge and potential difference
Day 2Ohm's law and resistance
Day 3Resistivity and factors affecting resistance
Day 4Series and parallel combinations
Day 5Electric power and electrical energy
Day 6Heating effect and mixed numericals
Day 7Full chapter revision and practice test

Five Effective Tips for Better Numerical Solving

1. Memorise formulas through regular practice
Do not simply read formulas. Write them in a notebook and practise using them.

2. Understand the meaning of each formula
For example, P = VI tells you that electric power depends on both voltage and current.

3. Practise different types of questions
Solve basic, intermediate and application-based questions.

4. Maintain a separate formula notebook
Write all important formulas and unit conversions in one place.

5. Analyse your mistakes
Whenever you solve a question incorrectly, identify whether the mistake was related to the formula, unit conversion or calculation.

15. Frequently Asked Questions (FAQs)

Q1. Which formulas are most important in Class 10 Electricity?

The most important formulas are I = Q/t, V = IR, R = ρl/A, the series and parallel resistance formulas, P = VI, P = I²R, P = V²/R and E = Pt.

Q2. How can I solve Electricity numericals easily?

Read the question carefully, write the given values, identify the correct formula, substitute the values and calculate the answer with the appropriate unit.

Q3. What is the difference between series and parallel combinations?

In a series combination, the same current flows through every resistor. In a parallel combination, the potential difference across each resistor is the same.

Q4. What is the commercial unit of electrical energy?

The commercial unit of electrical energy is kilowatt-hour (kWh). One kWh is equal to 3.6 × 10⁶ joules.

Q5. How many numerical problems should I practise daily?

Try solving 5–10 numerical problems daily. Focus on understanding the method rather than simply memorising answers.

Q6. What is the relationship between electric power and resistance?

For a fixed potential difference, power is inversely proportional to resistance (P = V²/R). For a fixed current, power is directly proportional to resistance (P = I²R).

Q7. Are Electricity numericals important for CBSE Class 10 Board Exams?

Yes. Numerical problems are an important way of testing students' understanding of electric current, resistance, Ohm's law, combinations of resistors, power and electrical energy.

Conclusion

Electricity numericals become much easier when you understand the basic concepts and apply the correct formulas.

Start with simple questions based on electric current and Ohm's law. Then gradually move towards series and parallel combinations, electric power, electrical energy and heating effect.

Remember, regular practice is more important than memorising solutions.

Understand the formula, practise the steps and check your answers. With consistent effort, you can develop confidence in solving Class 10 Electricity numericals.

Keep learning and keep improving with Choice Better – Helping Students Study Smarter!

Official Reference

For the latest prescribed topics, refer to the CBSE Class 10 Science Curriculum 2026–27 and your prescribed NCERT Science textbook.

Disclaimer: This article is an independent educational resource. The practice questions and worked examples are original learning exercises, not official or predicted CBSE examination questions.

Biotechnology Class 12: Principles, Processes & Diagrams

CBSE Class 12 Biotechnology diagram showing recombinant DNA technology, plasmid vector, PCR and genetic engineering
Biotechnology is one of the most interesting chapters in CBSE Class 12 Biology because it explains how scientists can use living organisms, cells, enzymes and DNA to develop useful products and technologies. From producing medicines to improving crops, biotechnology has changed the way we understand and use biological systems.

However, many students find this chapter difficult because it contains several scientific terms, enzymes, laboratory techniques and processes. Restriction enzymes, cloning vectors, PCR, gel electrophoresis and bioreactors may seem confusing when studied separately.

The best way to understand this chapter is to connect the tools with the steps of recombinant DNA technology. Once you understand how DNA is isolated, cut, joined, transferred and multiplied, the entire chapter becomes easier to remember.

This article explains Biotechnology: Principles and Processes in a student-friendly manner. It includes important concepts, simplified diagrams, labelled flowcharts, NCERT-based questions, solved answers and revision tips for CBSE Class 12 Biology.

What you will learn in this chapter:
  • Meaning and principles of biotechnology
  • Genetic engineering and bioprocess engineering
  • Tools of recombinant DNA technology
  • Restriction enzymes and cloning vectors
  • Polymerase Chain Reaction (PCR)
  • Gel electrophoresis and DNA separation
  • Steps involved in recombinant DNA technology
  • Bioreactors and downstream processing
  • Important NCERT-based questions and answers

Table of Contents

  1. What is biotechnology?
  2. Principles of modern biotechnology
  3. Tools of recombinant DNA technology
  4. Restriction enzymes
  5. Cloning vectors
  6. Competent host cells
  7. Steps of recombinant DNA technology
  8. Polymerase Chain Reaction
  9. Gel electrophoresis
  10. Bioreactors
  11. Downstream processing
  12. Important diagrams for examination
  13. NCERT-based questions with answers
  14. Common mistakes
  15. Revision strategy
  16. Frequently asked questions

1. What Is Biotechnology?

Biotechnology is the application of biological organisms, cells or their components to develop products and processes useful to human beings.

In simple words, biotechnology combines biological knowledge with technology to solve practical problems.

For example:

  • Microorganisms are used in the production of certain medicines.
  • Enzymes are used in food processing and industrial production.
  • Genetic engineering allows scientists to introduce selected genes into organisms.
  • Recombinant DNA technology helps produce useful biological products.

Traditional biotechnology has used organisms such as bacteria and yeast for fermentation. Modern biotechnology makes use of advanced molecular techniques to modify genetic material in a controlled way.

Traditional Biotechnology and Modern Biotechnology

Traditional biotechnology Modern biotechnology
Often uses naturally occurring organisms and biological processes. Uses molecular tools and techniques to manipulate genetic material.
Examples include fermentation and preparation of curd. Examples include recombinant DNA technology and gene cloning.
Usually involves less direct manipulation of DNA. Allows specific DNA sequences to be isolated, modified and transferred.

2. Principles of Modern Biotechnology

Modern biotechnology is based mainly on two important techniques:

A. Genetic Engineering

Genetic engineering involves changing the genetic material of an organism by introducing, removing or modifying selected DNA sequences.

In recombinant DNA technology, DNA from different sources is joined to form recombinant DNA. This DNA can then be introduced into a suitable host cell.

For example, a selected gene may be inserted into a bacterial plasmid so that the host cell can replicate the inserted DNA.

B. Bioprocess Engineering

Bioprocess engineering involves maintaining suitable conditions for growing microorganisms or cells on a large scale to obtain useful products.

It includes controlling factors such as temperature, pH, oxygen supply, nutrients and mixing.

Large vessels called bioreactors are used for this purpose.

Three Basic Steps of Genetic Modification

The overall process of genetic modification can be understood through three broad steps:

  1. Identification: Identify and isolate the DNA sequence carrying the desired gene.
  2. Introduction: Introduce the desired DNA into a suitable host organism.
  3. Maintenance: Ensure that the introduced DNA is maintained and passed on to the host's progeny, where required.

3. Tools of Recombinant DNA Technology

Recombinant DNA technology requires specific biological tools. Each tool performs a particular function in the process.

The major tools include:

  • Restriction enzymes
  • DNA ligase
  • DNA polymerases
  • Cloning vectors
  • Competent host organisms
ToolMain function
Restriction endonucleaseCuts DNA at specific recognition sequences.
DNA ligaseJoins DNA fragments by forming phosphodiester bonds.
DNA polymeraseSynthesises new DNA strands using a template.
Cloning vectorCarries the desired DNA into a host cell.
Competent host cellReceives recombinant DNA and allows its replication or expression.

4. Restriction Enzymes: Molecular Scissors

Restriction enzymes are important tools in genetic engineering. They recognise particular DNA sequences and cut DNA at or near those sites.

Restriction enzymes are often described as molecular scissors because they cut DNA into fragments at specific locations.

Types of Restriction Enzymes

Restriction enzymes include exonucleases and endonucleases.

  • Exonucleases: Remove nucleotides from the ends of DNA molecules.
  • Endonucleases: Cut DNA at internal positions.

Restriction endonucleases are particularly important in recombinant DNA technology because they recognise specific DNA sequences.

Recognition Sequence and Palindromic DNA

A restriction endonuclease recognises a particular sequence of DNA bases. Many commonly used restriction enzymes recognise palindromic nucleotide sequences.

A DNA palindrome is a sequence that reads the same in the 5′ to 3′ direction on the two complementary strands.

Example: EcoRI recognition sequence

5′ — G A A T T C — 3′

3′ — C T T A A G — 5′

EcoRI cuts between G and A on the two strands at staggered positions.

This cutting produces single-stranded overhanging ends called sticky ends.

Sticky Ends

Sticky ends are short, unpaired DNA sequences formed when certain restriction enzymes cut the two DNA strands at staggered positions.

They are useful because complementary sticky ends can pair with each other through hydrogen bonding. DNA ligase can then seal the sugar-phosphate backbone.

Why Are Sticky Ends Important?

  • They help foreign DNA and vector DNA join together.
  • Complementary ends can pair with each other.
  • They make recombinant DNA construction easier.

Naming of Restriction Enzymes

The name of a restriction enzyme is derived from the microorganism from which it was isolated.

For example, EcoRI is obtained from the bacterium Escherichia coli.

  • E represents the genus Escherichia.
  • co represents the species coli.
  • R represents the strain designation.
  • I indicates that it was the first enzyme isolated from that strain.

Exam point: Learn the recognition sequence of EcoRI and understand the meaning of sticky ends. Do not confuse restriction endonucleases with DNA ligase.

5. Cloning Vectors

A cloning vector is a DNA molecule used to carry foreign DNA into a host cell, where the inserted DNA can be replicated.

Commonly used cloning vectors include plasmids and bacteriophages.

What Is a Plasmid?

A plasmid is a small, usually circular, double-stranded DNA molecule found separately from the main chromosomal DNA in many bacteria. It can replicate independently when it has a functional origin of replication.

Plasmids are useful in genetic engineering because they can carry foreign DNA into bacterial host cells.

Essential Features of a Cloning Vector

A good cloning vector should have the following features:

1. Origin of Replication (ori)

The origin of replication is the DNA sequence from which replication begins. It allows the vector to replicate inside the host cell.

The copy number of a vector can be influenced by the origin of replication and other regulatory features.

2. Selectable Marker

A selectable marker helps identify or select host cells that have received the vector.

Antibiotic resistance genes are common selectable markers in bacterial plasmids. For example, pBR322 contains genes associated with resistance to ampicillin and tetracycline.

3. Cloning Sites

A cloning site is a specific DNA sequence where foreign DNA can be inserted. A suitable vector should have useful restriction sites that allow the desired DNA fragment to be introduced.

Diagram: Important Features of a Plasmid Vector

Illustrative plasmid vector map

Plasmid DNA
ori
Marker
Cloning site

Note: This is a simplified schematic to show the three main vector features. It is not a scale map of a particular plasmid.

pBR322

pBR322 is a commonly discussed plasmid cloning vector in Class 12 Biology. It contains an origin of replication and selectable marker genes, including antibiotic resistance genes.

It has recognition sites for several restriction enzymes. Insertion of foreign DNA into a marker gene can disrupt its function. This principle is used in insertional inactivation.

Insertional Inactivation

Insertional inactivation occurs when foreign DNA is inserted into a gene and disrupts its normal function.

For example, if foreign DNA is inserted into an antibiotic resistance gene, the recombinant plasmid may lose resistance to that antibiotic. This difference can help distinguish certain recombinant and non-recombinant colonies.

Blue-White Screening

Blue-white screening is another method used to identify recombinant colonies in suitable cloning systems. It is based on disruption of the lacZ gene.

  • Blue colonies generally indicate an intact lacZ system under the screening conditions.
  • White colonies generally indicate disruption of lacZ due to insertion of foreign DNA.

The colour result depends on the particular host, vector and screening medium used. It should not be treated as a universal feature of every plasmid.

6. Competent Host Cells

After recombinant DNA is prepared, it must be introduced into a suitable host cell. Bacterial cells do not normally take up foreign DNA efficiently, so they are made competent using suitable methods.

Competent cells are cells that have been treated to make them capable of taking up foreign DNA.

Methods of Introducing Recombinant DNA

MethodExplanation
Calcium treatment and heat shockChemical treatment followed by a brief heat shock can help bacterial cells take up DNA.
Micro-injectionDNA is directly injected into the nucleus of an animal cell using a fine needle.
Biolistics or gene gunDNA-coated microscopic particles are used to deliver DNA into cells, especially plant cells.
Disarmed pathogensModified biological vectors can transfer desired DNA into suitable host cells.
ElectroporationA brief electrical pulse creates temporary pores in cell membranes, allowing DNA to enter.

Remember: Micro-injection, biolistics and electroporation are different methods. Understand the basic principle of each rather than memorising only their names.

7. Steps Involved in Recombinant DNA Technology

This is the central section of the chapter. Recombinant DNA technology involves a sequence of steps through which a desired DNA fragment is isolated, joined to a vector, introduced into a host and used to obtain a desired product.

Overall Flowchart of Recombinant DNA Technology

1. Isolation of genetic material (DNA)
↓
2. Cutting DNA using restriction enzymes
↓
3. Separation and amplification of DNA fragments
↓
4. Joining the desired DNA with vector DNA
↓
5. Introduction into a suitable host cell
↓
6. Selection and multiplication of transformed cells
↓
7. Production in bioreactors
↓
8. Downstream processing and quality control

Step 1: Isolation of Genetic Material

The first step is to isolate DNA from the source organism.

DNA is enclosed within cells and must be released by breaking open the cell wall and cell membrane.

Different enzymes are used depending on the organism and the material to be removed:

  • Lysozyme: Helps break down bacterial cell walls.
  • Cellulase: Helps break down plant cell walls.
  • Chitinase: Helps break down fungal cell walls.
  • Proteases: Break down proteins.
  • RNase: Removes RNA.

After cell disruption and removal of unwanted components, DNA can be precipitated using chilled ethanol. The purified DNA can then be collected for further steps.

Step 2: Cutting DNA at Specific Sites

The isolated DNA and the vector DNA are cut using suitable restriction endonucleases. Ideally, the same restriction enzyme is used to generate compatible ends on the desired DNA fragment and vector.

These compatible ends can join through base pairing. DNA ligase is then used to seal the DNA backbone.

Step 3: Separation and Isolation of DNA Fragments

DNA fragments can be separated according to their size by gel electrophoresis.

The DNA samples are loaded into wells in an agarose gel. When an electric field is applied, DNA moves towards the positive electrode because its phosphate backbone carries a negative charge.

Smaller DNA fragments generally move faster and travel farther through the gel than larger fragments.

The desired DNA fragment can be identified, cut out of the gel and recovered. This process is called elution.

Step 4: Amplification of the Gene of Interest

The desired DNA sequence can be amplified using Polymerase Chain Reaction (PCR). PCR produces many copies of a selected DNA region.

This technique is explained in detail in the next section.

Step 5: Joining DNA Fragments

The desired DNA fragment and the vector DNA are joined using DNA ligase.

The resulting DNA molecule is called recombinant DNA because it contains DNA joined from different sources.

Step 6: Introduction of Recombinant DNA into Host Cells

The recombinant DNA is introduced into a suitable host cell. The host cell may be bacterial, plant or animal, depending on the purpose of the experiment.

Cells that successfully receive the recombinant DNA are identified using suitable selection or screening methods.

Step 7: Obtaining the Desired Product

Selected host cells are multiplied under controlled conditions. If the inserted gene is expressed appropriately, the host cells may produce the desired biological product.

For large-scale production, suitable bioreactors are used.

Step 8: Downstream Processing

After the desired product is obtained, it must be separated from cells and other materials, purified, formulated and tested for quality.

This final group of processes is called downstream processing.

8. Polymerase Chain Reaction (PCR)

Polymerase Chain Reaction, commonly called PCR, is a technique used to amplify a specific DNA segment in vitro.

In simple terms, PCR makes millions of copies of a selected DNA region from a very small starting amount.

Requirements for PCR

  • Template DNA containing the desired sequence
  • Two primers that flank the target region
  • Deoxyribonucleotide triphosphates (dNTPs)
  • Thermostable DNA polymerase, such as Taq polymerase
  • Suitable reaction buffer and magnesium ions

Three Main Steps of PCR

1. Denaturation

DNA is heated to separate the two strands by breaking hydrogen bonds.

↓
2. Annealing

The temperature is lowered so that primers bind to complementary sequences on the DNA templates.

↓
3. Extension

Taq polymerase extends the primers by adding nucleotides and synthesising new DNA strands.

These three steps are repeated for several cycles. Under ideal conditions, the amount of target DNA approximately doubles in each cycle.

Why Is Taq Polymerase Used?

Taq polymerase is a thermostable DNA polymerase obtained from the bacterium Thermus aquaticus. It can withstand the high temperatures used during DNA denaturation, making it suitable for repeated PCR cycles.

Applications of PCR

  • Amplification of selected DNA fragments
  • Detection of specific genetic material
  • Research in molecular biology
  • DNA analysis in forensic investigations
  • Diagnosis of certain infections through detection of pathogen genetic material

9. Gel Electrophoresis

Gel electrophoresis is a technique used to separate DNA fragments according to their size.

DNA has a negatively charged phosphate backbone. Therefore, when an electric field is applied, DNA moves towards the positive electrode.

Working of Gel Electrophoresis

  1. DNA samples are loaded into wells in an agarose gel.
  2. An electric current is applied across the gel.
  3. DNA fragments move towards the positive electrode.
  4. Smaller fragments generally move farther than larger fragments.
  5. DNA bands are visualised using a suitable staining and imaging method.
  6. The desired band can be cut out and the DNA recovered by elution.

Simple Diagram: DNA Movement in Gel Electrophoresis

Illustrative agarose gel

Wells
Large DNA
Medium DNA
Small DNA

DNA movement ↓ towards positive electrode (+)

Key point: Smaller fragments travel farther through the gel under the same conditions.

10. Bioreactors

A bioreactor is a large vessel in which biological processes are carried out under controlled conditions to produce useful products on a large scale.

Bioreactors provide an environment in which microorganisms or cells can grow and produce the required substance.

Important Conditions Maintained in a Bioreactor

  • Temperature
  • pH
  • Oxygen availability
  • Nutrient supply
  • Mixing and agitation
  • Foam control

Types of Bioreactors

Two commonly discussed types are:

1. Simple Stirred-Tank Bioreactor

It uses a mechanical stirrer to mix the contents and help maintain uniform conditions.

2. Sparged Stirred-Tank Bioreactor

It includes a sparger that introduces sterile air into the culture medium. This helps provide oxygen to aerobic microorganisms or cells.

Important Parts of a Stirred-Tank Bioreactor

  • Stirrer or agitator
  • Oxygen delivery system
  • Temperature control system
  • pH control system
  • Foam control system
  • Sampling and outlet ports

11. Downstream Processing

The process does not end when the desired biological product is produced. The product must be recovered and prepared for its intended use.

The processes involved in separating and purifying the product after biosynthesis are collectively known as downstream processing.

Main Steps of Downstream Processing

  1. Separation of the product from cells or culture medium.
  2. Purification to remove unwanted substances.
  3. Formulation with suitable additives or preservatives, where required.
  4. Quality control testing.
  5. Packaging and preparation for distribution.

For products used in healthcare, quality and safety checks are particularly important.

12. Important Diagrams for CBSE Class 12 Biology

Diagrams make complex processes easier to understand. Students should practise drawing simple, properly labelled diagrams rather than relying only on lengthy written descriptions.

DiagramImportant labels or points
EcoRI restriction enzyme cuttingRecognition sequence, cut positions and sticky ends
Plasmid cloning vectorOrigin of replication, selectable marker and cloning site
Recombinant DNA formationForeign DNA, vector DNA, compatible ends and DNA ligase
PCR cycleDenaturation, annealing and extension
Gel electrophoresisWells, negative and positive electrodes, DNA bands
Stirred-tank bioreactorStirrer, sparger, temperature control and culture vessel

How to Draw a Good Exam Diagram

  • Use a sharp pencil and draw clear lines.
  • Keep the diagram large enough for labels to be readable.
  • Use straight label lines that do not cross unnecessarily.
  • Write the diagram title below or above it.
  • Use correct scientific terms.
  • Practise each diagram from memory.

13. NCERT-Based Questions and Answers

The following questions are designed for revision of the concepts in NCERT Class 12 Biology Chapter 9. They are paraphrased practice questions, not a reproduction of the textbook exercise.

Very Short Answer Questions

Q1. What is recombinant DNA?

Answer: Recombinant DNA is a DNA molecule formed by joining DNA fragments from two or more different sources.

Q2. What is a cloning vector?

Answer: A cloning vector is a DNA molecule used to carry foreign DNA into a host cell so that the inserted DNA can be replicated.

Q3. What is the function of DNA ligase?

Answer: DNA ligase joins DNA fragments by forming phosphodiester bonds in the sugar-phosphate backbone.

Q4. What are sticky ends?

Answer: Sticky ends are short, single-stranded overhangs produced when certain restriction enzymes cut DNA at staggered positions.

Q5. Why is Taq polymerase used in PCR?

Answer: Taq polymerase is thermostable and can function after the high-temperature denaturation step in repeated PCR cycles.

Short Answer Questions

Q6. Differentiate between restriction endonucleases and DNA ligase.

Answer:

Restriction endonucleaseDNA ligase
Cuts DNA at specific recognition sequences.Joins DNA fragments.
Acts like molecular scissors.Acts like a molecular joining enzyme.

Q7. Mention three important features of a cloning vector.

Answer:

  1. Origin of replication (ori)
  2. Selectable marker
  3. Cloning site or suitable restriction site

Q8. Why are competent cells required in genetic engineering?

Answer: Competent cells are treated to make them capable of taking up foreign DNA. They are used to introduce recombinant DNA into a suitable host cell.

Q9. Explain the three steps of PCR.

Answer:

  1. Denaturation: The DNA strands separate at high temperature.
  2. Annealing: Primers bind to complementary sequences.
  3. Extension: DNA polymerase synthesises new DNA strands.

Q10. Why does DNA move towards the positive electrode during gel electrophoresis?

Answer: DNA has a negatively charged phosphate backbone. Therefore, it moves towards the positively charged electrode when an electric field is applied.

Long Answer Questions

Q11. Explain the major steps involved in recombinant DNA technology.

Answer:

  1. Isolation of genetic material from the source organism.
  2. Cutting the DNA using suitable restriction enzymes.
  3. Separation and amplification of the desired DNA fragment.
  4. Joining the desired DNA fragment with vector DNA using DNA ligase.
  5. Introduction of recombinant DNA into a suitable host cell.
  6. Selection and multiplication of cells containing the desired recombinant DNA.
  7. Large-scale production using suitable bioreactors.
  8. Downstream processing, purification and quality control.

Q12. Explain the role of a cloning vector in recombinant DNA technology.

Answer: A cloning vector carries the desired foreign DNA into a host cell. It should have an origin of replication, selectable marker and suitable cloning sites. Once introduced into a compatible host, the vector can replicate and help multiply the inserted DNA.

Q13. Explain the importance of gel electrophoresis in recombinant DNA technology.

Answer: Gel electrophoresis separates DNA fragments according to their size. DNA moves towards the positive electrode because of its negative charge. Smaller fragments generally move farther through the gel than larger fragments. The desired DNA fragment can be recovered from the gel through elution and used in further steps of recombinant DNA technology.

Q14. What is downstream processing? Why is it important?

Answer: Downstream processing refers to the separation, purification and preparation of a biological product after its production. It is important because the product must meet the required quality and safety standards before its intended use.

Application-Based Questions

Q15. A scientist wants to make many copies of a particular DNA fragment. Which technique should be used and why?

Answer: Polymerase Chain Reaction (PCR) should be used because it amplifies a selected DNA region through repeated cycles of denaturation, annealing and extension.

Q16. A plasmid contains an origin of replication but no selectable marker. Why might it be difficult to identify host cells containing this plasmid?

Answer: Although the plasmid may replicate, the absence of a selectable marker makes it difficult to distinguish cells that have taken up the plasmid from those that have not, using that selection method.

Q17. Why should the vector and foreign DNA be cut with compatible restriction ends?

Answer: Compatible ends can pair through complementary base pairing, allowing DNA ligase to join the foreign DNA and vector DNA.

Q18. In a PCR experiment, why is a thermostable DNA polymerase preferred?

Answer: PCR repeatedly involves high-temperature denaturation. A thermostable enzyme remains functional through these cycles and can synthesise new DNA strands during extension.

14. Important Differences for Quick Revision

Genetic Engineering vs Bioprocess Engineering

Genetic engineeringBioprocess engineering
Deals with manipulation of genetic material.Deals with large-scale production using biological systems.
Includes cutting, joining and transferring DNA.Includes growing cells under controlled conditions.

PCR vs Gel Electrophoresis

PCRGel electrophoresis
Amplifies a selected DNA region.Separates DNA fragments according to size.
Uses primers and DNA polymerase.Uses a gel and an electric field.
Produces many copies of target DNA.Produces separated DNA bands for analysis and recovery.

Restriction Enzyme vs DNA Ligase

Restriction enzymeDNA ligase
Cuts DNA.Joins DNA fragments.
Recognises specific DNA sequences.Seals breaks in the DNA backbone.

15. Common Mistakes Students Should Avoid

  • Confusing restriction enzymes with ligase: Remember that restriction enzymes cut DNA, while ligase joins DNA fragments.
  • Mixing up PCR steps: Learn the order: denaturation, annealing and extension.
  • Forgetting the role of ori: It is the origin of replication, not a selectable marker.
  • Confusing cloning and expression: Cloning increases the number of DNA copies; expression involves using genetic information to produce RNA or protein.
  • Writing that DNA moves towards the negative electrode: DNA is negatively charged and moves towards the positive electrode.
  • Ignoring downstream processing: Product recovery and purification are important final stages.
  • Drawing incomplete diagrams: Include the important labels and explain the function of each major part.

16. How to Prepare This Chapter for CBSE Class 12 Biology

Instead of reading the chapter repeatedly without testing yourself, use a structured revision method.

Step 1: Understand the Sequence

Learn the complete order of recombinant DNA technology. Try to explain why each step is necessary before moving to the next one.

Step 2: Prepare a Tool-and-Function Table

Make a small notebook table containing restriction enzymes, DNA ligase, polymerase, vectors and competent cells. Write one main function beside each term.

Step 3: Practise the Diagrams

Draw the PCR flowchart, plasmid vector, gel electrophoresis and recombinant DNA process from memory. Check the labels after completing each drawing.

Step 4: Solve NCERT Questions

Read the NCERT text carefully and attempt its in-text and end-of-chapter exercises. Use the questions in this article as additional practice.

Step 5: Test Your Understanding

Close your textbook and explain the entire process of recombinant DNA technology in your own words. If you can explain the sequence without looking at the notes, your understanding is improving.

For a wider Biology preparation routine, read our NEET 2027 preparation strategy and study guidance. You can also use our CBSE Class 12 month-by-month study plan for 2027 to organise chapter revision.

For better recall, try the revision techniques that help students remember concepts and improve exam preparation.

17. Quick Revision Checklist

Before your examination, check whether you can explain each of the following without looking at your textbook.

  • Meaning of biotechnology
  • Genetic engineering and bioprocess engineering
  • Three basic steps of genetic modification
  • Restriction endonucleases and palindromic sequences
  • Sticky ends and DNA ligase
  • Origin of replication, selectable marker and cloning site
  • pBR322 and insertional inactivation
  • Methods of introducing recombinant DNA into host cells
  • Isolation and cutting of DNA
  • PCR and its three stages
  • Gel electrophoresis and elution
  • Bioreactors and their important parts
  • Downstream processing

18. Frequently Asked Questions

1. What is biotechnology in Class 12 Biology?

Biotechnology is the application of biological organisms, cells or their components to develop useful products and processes. Modern biotechnology includes genetic engineering and bioprocess engineering.

2. What are the two main principles of modern biotechnology?

The two main principles are genetic engineering and bioprocess engineering. Genetic engineering involves manipulation of genetic material, while bioprocess engineering involves growing biological systems under controlled conditions for large-scale production.

3. What is the function of restriction enzymes?

Restriction enzymes recognise specific DNA sequences and cut DNA at or near those sequences. They are important tools for preparing DNA fragments for recombinant DNA technology.

4. What is the difference between sticky ends and blunt ends?

Sticky ends have short single-stranded overhangs, whereas blunt ends are formed when both DNA strands are cut at the same position without overhangs.

5. Why is a cloning vector necessary?

A cloning vector carries foreign DNA into a host cell and allows the inserted DNA to be replicated in a suitable host.

6. What are the three stages of PCR?

The three main stages are denaturation, annealing and extension.

7. What is the role of Taq polymerase?

Taq polymerase is a thermostable DNA polymerase that synthesises new DNA strands during the extension stage of PCR.

8. Why is gel electrophoresis used?

It is used to separate DNA fragments according to their size. Smaller fragments generally move farther through the gel than larger fragments.

9. What is a bioreactor?

A bioreactor is a vessel that provides controlled conditions for growing cells or microorganisms and producing useful biological products on a large scale.

10. What is downstream processing?

Downstream processing includes the separation, purification, formulation and quality control of a product after its biological production.

11. Is Biotechnology: Principles and Processes different from Biotechnology and its Applications?

Yes. Principles and Processes focuses on the tools and techniques of genetic engineering and recombinant DNA technology. Biotechnology and its Applications focuses on the use of biotechnology in areas such as healthcare and agriculture.

Conclusion

Biotechnology: Principles and Processes becomes easier when you understand how the different tools work together. Restriction enzymes cut DNA, DNA ligase joins fragments, vectors carry foreign DNA, competent host cells receive recombinant DNA, PCR amplifies selected sequences, and bioreactors support large-scale production.

Do not prepare this chapter only by memorising definitions. Understand the sequence of recombinant DNA technology, practise the diagrams and write answers using accurate scientific terms.

Most importantly, read the NCERT chapter carefully and solve its exercises. Use this guide for concept revision, diagram practice and additional question preparation.

Study systematically, practise regularly and prepare confidently for your CBSE Class 12 Biology examination.


About the Author

Sadashiba Sahu | Choice Better Blog

Sadashiba Sahu is a teacher and education blogger who shares practical study strategies, examination guidance and learning resources to help students study smarter and prepare effectively.

Educational note: This article is a supplementary learning resource. NCERT textbooks and the latest official CBSE syllabus should remain the primary references for examination preparation.

Search This Blog

Powered by Blogger.